Manual Switel WT237 (page 67 of 76) (English, German, French, Italian)

687858

Zoom out

Zoom in

1/76

- Operation -

4.7 Sending a call signal

You can summon the attention of the person you are calling by means of

the call signal. Press the call button

once. A signal tone will sound on

the unit called. Remember that call signals will sound on all radios that are

within receiving range and are switched to the same channel and call

code. Now wait until the person called answers.

Setting the call signal

The radio has 10 different call tones.

1. Press the

button three times. The display will show the C

indicator and the currently selected call signal will flash.

2. A new call tone between 1 and 10 can now be selected using the

and

buttons. When the setting is 0, no call signal is transmitted.

3. Confirm the selection with the talk button

4.8 Using the headset

The radios can be used with an external microphone and earpiece, a so-

called headset. In this way, you can keep your hands free for other

activities. You will find the connecting socket on the left-hand side

underneath a cover.

1. Always switch off the radio before connecting the headset. Open the

cover and insert the plug into the socket.

2. Now switch the radio on again. The loudspeaker and microphone in

the radio are now switched off in headset mode.

3. Now press the talk button

once. If the talk button is not

pressed, the radio will work in VOX mode. You will find further

information on this in Chapter 4.9.

NOTE: Do not connect the headset to the radio when it is switched on. In

this case, the radio will transmit continuously. Remove the headset and

then switch off the radio.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Switel WT237 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Switel WT237 Manual

Product: