687849
44
Zoom out
Zoom in
Previous page
1/52
Next page
- Operation -
44
3.3 Calling another subscriber
When you want to talk to other subscribers, proceed as follows: The
two radios must be switched on and set to the same channel.
To speak, press the PUSH TO TALK button on the left-hand side.
Hold the unit about 5 cm from your mouth and speak in a normal
voice. When you have finished, release the PUSH TO TALK button.
The person you are speaking to will hear a signal tone (Roger beep)
when you release the TALK button. This will indicate to the other
subscriber that you have finished speaking and are waiting for a reply.
Note: While you are holding the PUSH TO TALK button, you
will not be able to hear any incoming calls. As is usual with
radio units, only one of the two participants in the call can
speak at any one time.
Therefore, always wait until you hear the signal tone (Roger beep)
before pressing the PUSH TO TALK button again.
While you are pressing the PUSH TO TALK button, the
symbol
will appear in the display. When you receive a call, the
symbol will
appear in the display.
Volume adjustment
The volume of the incoming call signal depends on your volume
setting. Eight volume levels can be set using the
!and " buttons.
Transmitting a call signal
Press the PUSH TO TALK button and press the
! button once. A
ringing tone will sound on the called unit for two seconds.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel WT108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel WT108 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info