687686
8
Zoom out
Zoom in
Previous page
1/52
Next page
NEUE KAMERA HINZUFÜGEN
Ihr Monitor unterstützt insgesamt vier aktive Kameras. Wenn Sie eine Kamera hinzufügen möchten, müs-
sen Sie sie an dem Monitor anmelden, damit sie miteinander kommunizieren können.
Wenn eine Kamera bereits dem Kanal zugeordnet ist, dem Sie die neue Kamera zuordnen möchten,
überschreibt der Monitor die vorhandene Kamera-Verbindung mit der neuen.
Nur eine Kamera zur Zeit anmelden! Der Monitor verbindet sich mit der ersten Kamera, die er erkennt.
Wenn zwei oder mehr Kameras im Anmeldmodus sind, können Sie nicht kontrollieren, welche Kamera
der Monitor zuerst erkennt.
Kamera anmelden
1 Tippen Sie im Bildschirm "Einstellungen Kamera/Pairing" auf das Kamerasymbol, das Sie anmelden
möchten. Ein Verarbeitungssymbol wird für einen 30-Sekunden-Countdown angezeigt.
2 Während des 30-Sekunden-Countdowns drücken Sie kurz die Pairing-Taste auf der Kamera.
3 Das System passt den Live View-Bildschirm automatisch an.
Hilfe bei der Anmeldung neuer Kameras
6
Wenn … Tun Sie folgendes…
die Signalstärkeanzeige
keinen Balken anzeigt
Stellen Sie sicher, dass die Kamera mit Spannung versorgt wird.
Überprüfen Sie, ob die Antenne der Kamera angeschlossen ist und die
Antenne des Monitors ausgeklappt ist.
Prüfen Sie, ob die Kamera mit dem richtigen Kanal verbunden ist.
Führen Sie die Anmeldung noch einmal durch.
die Kamera sich nicht an-
melden lässt
Stellen Sie sicher, dass die Kamera mit Spannung versorgt wird.
Drücken Sie die Pairing-Taste nur kurz, halten Sie sie nicht gedrückt.
Hauptpunkt Unterpunkt Beschreibung
Einstellung
Netzwerk
Erweiterte
Einstellungen
Wählen Sie „Dynamische IP-Adresse“ oder geben Sie
eine statische IP-Adresse ein.
Passwort wiederher-
stellen
Stellen Sie das MyCam View-APP-Kennwort auf die
Standardeinstellung zurück (000000).
Information Zeigt Netzwerkinformationen an und ermöglicht
Ihnen, Änderungen in Ihrem Netzwerk und die UID
des Monitors zu ändern.
Firmware Upgrade Hier können Sie auswählen, wie Sie Ihre Firmware aktualisieren möchten (von
der SD-Karte oder vom Server).
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel HSIP 5700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel HSIP 5700 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info