688369
28
Zoom out
Zoom in
Previous page
1/36
Next page
2
Connecting the charging station
2
Connect the charging station to the mains. Ensure access to the power
adapter plug is not obstructed by furniture or such.
2
Only applies to telephone sets with at least two handsets
Inserting the batteries
Open the battery compartment cover. Put in the batteries. Close the battery
compartment cover.
a
Attention: Use only type AAA NiMH 1.2 V / 500 mAh rechargeable
batteries. Never use normal batteries / primary cell batteries.
Observe the correct polarity!
Charging the batteries
Before the handset is used for the first time, insert it in the base
station / charging station for at least 15 hours.
The handset warms up during the charging process. This is normal and
does not represent a risk. The battery status is shown on the display. When the
battery capacity is nearly exhausted, the battery symbol will flash in the display.
End your call and place the handset into the base or charging station for
charging.
After a short time, the battery symbol will appear to be fully charged but this is
actually not the case. The battery capacity will decrease rapidly. We advise
you to put the handset on the base unit for 12 hours so that it can be
recharged completely.
Setting the Language
In delivery state the language is set to “German“.
… press, select
MOBILTEIL
using ¦ /
and press .
¦ / Select
SPRACHE
and press
.
¦ / Select a language and press
.
OK
OK
OK
OK
3 Operating elements (front coverpage)
Handset
1 Display
2 Call key
3 Arrow key left/Flash key (R) /
long-press for switching the dial mode
4 Menu/OK
5 Phonebook
6 Digit keys (1…0 also for entering names
in the phonebook /
long-press # for key lock on/off,
long press * for ringer handset on/off)
7 Volume key / ringtone melody,
ringtone volume
8 Earpiece
9 Arrow key right/Call list/
Hands-free
10 Internal key / ESC (abort pro-
gram mode / back to idle state)
11 Mute key (microphone off)
12 Redial key/Pause/long-press for
switching the flash time
13 Microphone
Base station
14 Charging the batteries / active call (flashing)
15 Display for answering machine
16 Power
17 Keys for answering machine (see below)
18 Paging key
19 Charging contacts for handset
Key In idle mode During playback
briefly: check number of rings decrease speaker volume
press and hold: set number of rings
briefly: answering machine on/off stop playback
press and hold: select OGM
briefly: play OGM back to previous message
press and hold: record OGM (during settings: decrease value)
briefly: check remote PIN increase speaker volume
press and hold: set remote PIN
briefly: confirmation “Delete all“ Delete current message
press and hold: delete all messages
briefly: (no function) skip to next message
press and hold: record memo (during settings: increase value)
briefly: playback messages Pause
DET367x_GB_Version2 04.06.2009 13:55 Uhr Seite 2
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel DET3673 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel DET3673 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info