688281
103
Zoom out
Zoom in
Previous page
1/112
Next page
103
Answering mode
You can select between answer with message recording" and answer only" modes.
The answering machine is provided with pre−recorded outgoing messages at the
factory. These outgoing messages are played if you do not record your own outgo-
ing messages.
Answer with message recording
(OGM 1)
An outgoing message is played to the callers after which
they can leave a message (max. length approx. three
minutes). The answering machine can save up to 55 in-
coming messages with a total recording time of up to 11
minutes.
Answer only
(OGM 2)
An outgoing message is played to the caller after which
the connection is ended. This mode is automatically ans-
wered when the message memory is full.
1. Press the button for 2 seconds. Switch between OGM 1 and OGM 2.
Recording/Playing outgoing message
1. Press the button for 2 seconds.
2. After the acoustic signal: Speak your text loud and clear towards the answering machine.
3. Press the button to end recording.
4. Press the button to play back the current outgoing message.
You can repeat this procedure as often as required. A new recording dubs over the
old recording. Therefore, the old recording need not be deleted.
Deleting an outgoing message
Your own outgoing message will be deleted and the pre−recorded outgoing message is resto-
red.
1. Press the button to play back the current outgoing message.
2. Press and hold the button during playback to delete the outgoing message.
The pre−recorded messages cannot be deleted.
Setting the ring delay
This setting enables you to ensure you have enough time to take an incoming call before the
answering machine switches on and takes it. You can select between 2 and 9 rings before the
call is taken or the you can select the tollsaver function. This setting is particularly useful in
conjunction with the remote access function. When this function is set, the answering machine
takes an incoming call after 5 rings as long as no new messages have been recorded. If new
messages have been recorded, however, the answering machine switches on after 2 rings. In
the case of all other settings, the answering machine switches on after the set number of rings.
1. Press the button for 2 seconds to activate programming mode.
2. Use the and buttons to select the required delay.
3. Press the button. The setting is saved.
4. Press the button to display the current setting.
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel DET1571 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel DET1571 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info