688248

Switel DE333 Manual

25
Zoom out
Zoom in
Previous page
1/28
Next page
5
GB
Registering a handset
☞ Five handsets can be registered to a base station. The handsets deli-
vered with your telephone are already registered. To register a “foreign“
handset please refer to it’s user manual.
First of all disconnect the base station from the mains and re-connect
it. After this the base station will be in registration mode for 3 minutes.
… press and hold for approx.
3 seconds until and flash.
… press and hold for approx.
3 seconds.
Enter a number for the base station (1 … 5) to subscribe to.
Enter the PIN for the base station (default setting for DE 331 base sta-
tion “0 0 0 0“).
If the handset is registered the display will show HS and the handset’s
internal telephone number.
Deleting a handset
☞ You can delete a handset from a base to allow another handset to be
registered. Note: you can only remove other handset in your system but
you are not able to remove the handset you are using.
… press and hold for approx.
3 seconds.
… press and hold
f
or approx.
3 seconds.
Enter the PIN for the base station (default setting for DE 331 base sta-
tion “0 0 0 0“).
Enter the internal telephone number (1…5) of the handset you want to
remove.
The handset will go back to standby is the removal is successfully.
Ringtone melody (handset)
… press and hold for approx.
3 seconds. The current melody sounds.
… select the desired melody.
Press to confirm the setting.
Ringtone volume (handset)
… press briefly. The handset will ring in the current volume.
… select the desired volume. When the volume is “0“ (ringer off),
appears in the display.
Press to confirm the setting.
Setting the flash time
☞ You can set the flash time to 100 ms (usually for special services of
your telephone provider/delivery state) or 300 ms (e. g. for a telephone
exchange). In case of questions please contact your telephone provider or
the system administator of your PBX.
… press and hold for approx.
3 seconds. S (100 ms) or L (300 ms)
appears in the display. For switching the flash time press and hold
again for approx. 3 seconds.
Setting the dial mode (tone / pulse)
☞ You can switch the dial mode. In most situations the TONE option
should be selected.
… press and hold for approx.
3 seconds. t (tone) or P (pulse) appears
in the display. For switching the dial mode press and hold again
for approx. 3 seconds.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel DE333 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel DE333 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info