688197
76
Zoom out
Zoom in
Previous page
1/88
Next page
57
76
Internal calls
1
If several handsets are registered on the base station, internal calls can be made between
them free of charge.
1. Press the E button.
2. Enter the number of the handset to be contacted (1...5).
3. Complete the call.
4. Press the B button to end the call.
External phone calls
There are two methods by which to dial phone numbers, namely direct dialling and indirect dial-
ling.
Direct dialling
1. Press the A button and wait for the dialling tone.
2. Dial the phone number.
3. Complete the call.
4. Press the B button to end the call.
Indirect dialling
1. Dial the phone number.
2. Delete any incorrect digits using the C button.
3. Press the A button. The phone number is dialled and a connection established.
4. Complete the call.
5. Press the B button to end the call.
Holding a call / brokering
While a call is in progress, it is possible to dial another handset in order to consult with some-
one. The external caller is put on hold while you converse with the second, internal person cal-
led. You can repeat this procedure as often as required.
1. Press the O button to initiate the enquiry call. The line is put on hold.
2. Dial the number of the subscriber’s extension you require (e.g. 22).
3. Press the O again to take the call back; or press the B button to forward the call
to the extension dialled.
The above information could vary according to the PABX system used. Please read
the information provided in the manuals supplied with your PABX system.
Making conference calls
An external call can be transferred to another internal handset for a conference call.
1. While making an external call, press the E button. The external caller is put on hold.
2. Enter the number of the handset required. The handset is dialled.
3. When the handset dialled answers, press and hold the E button for 2 seconds to
enable the Conference Call mode.
4. Any handset can quit the conference call by pressing the B button. The call is
continued on the other handset.
Setting the receiver volume
The receiver volume as well as the loudspeaker volume for Handsfree mode can be adjusted to
one of 5 levels.
To adjust the receiver volume while making a call, press the L button several times, as ap-
propriate.
1
Internal calls are only possible when at least two handsets are registered in the system
Checking the contents of the package" on Page 67.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel DE153 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel DE153 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info