688170

Switel DE102 Manual

78
Zoom out
Zoom in
Previous page
1/100
Next page
− Starting Up −
78
2 Starting Up
2.1 Safety information
Caution: It is essential to read the Safety Information in Chapter 1 before starting up.
2.2 Checking the contents of the package
The package contains:
a base station with power adapter plug
a telephone connection cable
two handsets four rechargeable batteries
a charging station with power adapter plug an operating manual
2.3 Connecting the base station
Connect the base station as illustrated in the dia-
gram. For reasons of safety, only use the power
adapter plug and telephone connection cable sup-
plied. The power adapter plug from the base station
must always be connected to a properly installed
230 V mains power outlet.
2.4 Connecting the charging station
Connect the charging station as illustrated in the dia-
gram. For reasons of safety, only use the power
adapter plug supplied.
2.5 Inserting the batteries
Insert two batteries of the type AAA Ni−MH 1.2 V 550 mAh in the bat-
tery compartment after opening it. Pay attention to correct polarity
(refer to Fig.). Close the battery compartment cover.
Important: Do not use any other type of batteries.
2.6 Charging the batteries
When preparing to use the handset for the first time, place it in the base station (display facing up-
wards) for at least 14 hours. The charging control lamp on the base station lights up. The handset
warms up during the charging process. This is normal and does not represent a risk. Do not
charge the handset with charging units from other manufacturers. Failure to charge the batteries
properly can lead to telephone malfunction.
The current battery charge status is indicated in the display:
Full Half empty Low Empty
2.7 Tone or Pulse dialling mode
The telephone can be connected to both analogue connections (pulse dialling) and digital con-
nections (tone dialling). The equipment is set to Tone dialling mode at the factory. If the telephone
does not work on your telephone connection, refer to Chapter 7.3 to learn how to switch the tele-
phone to analogue, pulse dialling mode.
2.8 Operating on private branch exchanges
If your telephone is connected to a private branch exchange, use the R button to implement
the transfer calls or automatic callback functions. When used on a private branch exchange, a Re-
call time of 90 ms must be set. The sales outlet where you purchased the telephone can tell you
whether it will work on your private branch exchange.
2.9 Supplementary services from your telephone network provider
The SWITEL telephone supports all major supplementary services offered by the telephone net-
work provider (e.g. brokering, call waiting, three−way conferencing, etc.). Press the R button
to use these services. Please contact the telephone network provider with regard to enabling the
supplementary services.
TAE−F
230 V
50 Hz
230 V
50 Hz
… 78 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel DE102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel DE102 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info