687667

Switel DCT5872 Manual

192
Zoom out
Zoom in
Previous page
1/204
Next page
316
PBX / Supplementary Services
192
9 PBX / Supplementary Services
R−key and recall time, supplementary services
Your telephone supports supplementary services provided by your telephone network provider,
such as brokering, call waiting and conference facilities. Press the to use these supplementary
services. Please contact your telephone network provider regarding which Recall (Flash) time must
be set to use the supplementary services. Also contact your telephone network provider with re-
gard to enabling supplementary services. The recall (flash) time is set using the menu;
Page 169.
R−key on private branch exchanges
If the telephone is connected to a private branch exchange, functions such as transferring calls
and automatic call back can be used via the key. Refer to the operating manual provided with
your private branch exchange as to which recall (flash) time must be set in order to use these
functions. The sales outlet where you purchased the exchange can provide information as to
whether the telephone will work properly with the exchange. The recall (flash) time is set using the
menu; Page 169.
Number for an outside line (access code)
When using private branch exchanges, it is necessary to dial an access code to obtain the dialling
tone for an outside line. The number for an outside line is often 0" or 9". Dial this number first and
wait for the dialling tone. You can then dial the actual phone number.
If one−touch dialling keys are to be used when the phone is connected to a private
branch exchange, please take this into consideration and enter the access code
before the actual phone number when programming the one−touch dialling keys.
It is also possible to program a dialling pause between the number for an outside
line and the actual phone number; Section Dialling pause".
Dialling pause
When using private branch exchanges, it is necessary to dial an access code to obtain the dialling
tone for an outside line. When using some older private branch exchanges, it takes a little time be-
fore the dialling tone becomes audible. In the case of such private branch exchanges, a dialling
pause can be inserted after the number for an outside line in order to continue dialling directly with-
out having to wait for the dialling tone. The dialling pause is inserted by pressing and holding the
key for 3 seconds.
The actual phone number is dialled a certain time after the number for an outside line.
The dialling pause can also be entered with the phone numbers in the phone book.
… 192 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel DCT5872 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel DCT5872 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info