688145

Switel DCT407 Manual

105
Zoom out
Zoom in
Previous page
1/112
Next page
− Telephone Answering Machine −
105
13.5 Outgoing messages
13.5.1 Selecting the answering mode
The answering machine is provided with two, pre−recorded outgoing messages. A distinction is
made between outgoing message with message recording (OGM 1) and outgoing message only
(OGM 2). If no other outgoing message is recorded, the pre−recorded outgoing message is played
automatically. When the answering machine memory is full, it automatically reverts to the outgoing
message only (OGM 2) message explaining to the caller that messages cannot be left.
Proceed as follows to change the answering mode:
First, switch the answering machine OFF.
2 sec # Activate the outgoing message mode.
" Selects OGM 1 (with recording)
Selects OGM 2 (without recording)
The outgoing message currently set is then played back.
13.5.2 Recording outgoing messages
Your own outgoing message must be minimally 5 seconds and maximally 1:30 minutes long.
Firstly, select the outgoing message type you want to replace (refer to Section 13.5.1). The re-
spective, pre−recorded outgoing message is replaced by the one you record. The pre−recorded
outgoing messages can be restored simply by deleting your own outgoing messages (refer to
Section 8.5.4).
# Activate outgoing message mode.
" or Wait until the outgoing message has been played and
then press and hold the Rewind button (to change OGM
1) or Forward button (to change OGM 2).
 $ Speak your message after the acoustic signal. To end
recording, simply release the " or button.
The new outgoing message is played back.
13.5.3 Playing the current outgoing message
# Play the outgoing message
! Stop playback
13.5.4 Deleting your own outgoing message (resetting default outgoing message)
After deleting your own outgoing message, the pre−recorded message is automatically reactiva-
ted.
# Play the outgoing message
% Delete your own outgoing message /
Activate default outgoing message
13.6 Receiving messages
13.6.1 Memory capacity
The answering machine can digitally save up to 59 incoming messages with a total length of 11:30
minutes. The maximum length for each incoming call is 3 minutes. If the caller’s message is lon-
ger, the call is disconnected. If there is a pause in excess of 10 seconds during recording, the call
is automatically ended.
When there is no memory capacity available to record new messages, no further messages are
recorded. The caller receives a message automatically, indicating that no messages can be left.
13.6.2 Playing back messages
The recorded messages are played back in the sequence they were recorded. The weekday and
time of receipt are played back with each message.
& Play the message
! Stop playback of the message
" Repeat playback of the message
Play the next message
13.6.3 Deleting one message
& Play the message
% Press the Delete button as the message is being played.
… 105 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel DCT407 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel DCT407 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info