688141

Switel DCC632 COMBO Manual

123
Zoom out
Zoom in
Previous page
1/132
Next page
Registering and de-registering a handset
123
6 Registering and de-registering a handset
6.1 Registering a handset to the DCC632x base station
You can register to 5 handsets onto one base station. Every handset is already registered to the base
station on delivery. You only need to register the handset if:
the handset has previously been de-registered from this base station (e. g. to reinitialise it)
you want to register a different handset to the base station.
The following description only applies to DCC632x handsets and base stations.
1 Hold down the paging key on the base station for 10 seconds.
"REGISTER" is now shown in the base station display. This means
that the base station is in registration mode. The handset can now be
registered as follows:
2 Press the Menu/OK key on the handset.
3 Select "REGISTER" and confirm.
4 Enter the number of the base station (1-4) to which you want register
the handset.
5 The device will search for the base station. When it has found it, you
will be asked to enter the (fourdigit) PIN code.
6 Enter the PIN code of the base station (default 0000). If the PIN code
if wrong, the handset will search for the base station again.
Once the handset has been registered, its name and number appear
on the display.
Info: To change the base station PIN code, see „4.14 Setting the system PIN“.
6.2 De-registering a handset from the DCC632x base station
You can de-register a handset from a base station in order to register a different handset.
1 Press the Menu / OK key.
2 Select "REMOVE HS" and confirm.
3 Enter the PIN code of the base station (default 0000).
4 Enter the internal number of the handset you want to de-register (1-5)
and confirm.
Once the handset has been successfully deregistered, it reverts to
standby mode. Otherwise you will be asked to enter the handset
number again.
6.3 De-registering a handset from the DCC632x base station via the handset
1 Press the Menu / OK key.
2 Select "DE-REGISTER" and confirm.
3 Enter the PIN code of the base station (default 0000).
… 123 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel DCC632 COMBO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel DCC632 COMBO in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info