300041
36
Zoom out
Zoom in
Previous page
1/44
Next page
- Installation -
36
3 Installation
3.1 Safety information
NOTE! Before installation, it is essential that you read the general information at the beginning of this
user guide.
3.2 Check contents of pack
The following items are supplied in this pack:
One telephone base One telephone handset
One telephone line cord One curly cord
One power adaptor Two AAA batteries
This user guide One warranty card
3.3 Connecting the telephone handset
After unpacking your telephone, connect the telephone handset to the base unit. First take one end of
the curly cord and plug it into the socket on the handset. Take the other end of the curly cord and plug it
into the socket on the side of the telephone base unit.
3.4 Insert batteries (supplied)
Install the batteries before connecting your telephone to the telephone socket or power supply. In case
of AC power failure, the batteries are required for the clock display to function. However, the radio and
alarm will not operate without mains power.
1. Make sure that the telephone is not connected to the telephone network.
2. Locate the battery compartment on the underside of your telephone.
3. Open the battery compartment with a pen tip or a pointed object.
4. Insert the batteries, ensuring that the polarity is correct.
5. Close the battery compartment.
The batteries must be changed when the display starts to dim.
Do not use rechargeable batteries, as these could possibly lead to a short circuit. When replacing the
batteries use AAA 1.5V alkaline batteries. Do not throw batteries into fire or immerse in water. Do not
dispose of old or faulty batteries with the normal household waste. Before installing or changing the
batteries, make sure that the telephone is not connected to the telephone network.
3.5 Connect Mains Power Supply
Connect the AC adaptor to the power socket and plug the cable into the jack marked DC 12V on the
back of the telephone. The power LED comes on to indicate the power supply is good. The battery
should always be installed, even when using the mains power supply, to protect against power
interruption.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel crt 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel crt 7 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info