687910

Switel CD728 Manual

135
Zoom out
Zoom in
Previous page
1/140
Next page
- Multiple mobile units -
135
11.3 Holding conference calls
An external call can be connected to a further internal subscriber as a conference call.
In this way, two mobile units can talk to the external caller simultaneously.
Establish the required connection with the external subscriber.
Then call the internal mobile unit. To do this, press the OPTIONS display button
and choose the INTERCOM function. Press the number of the required mobile
unit. You can also select the required mobile unit with the cursor and make the
connection with the OK display button. If the internal call is not accepted, press the
CANCEL display button and you will be connected to the external subscriber once
more.
If the internal call is accepted by the selected mobile unit, press the OPTIONS
display button again and choose the CONFERENCE function. Both internal mobile
units will now be connected to the external subscriber.
To end the conference call, press the OPTIONS display button on one of the
mobile units. Then select the EXIT CONF. function and confirm with OK. Only one
mobile unit will then remain connected to the external subscriber. The call can be
terminated here with the
button.
11.4 Logging on and logging off mobile units
11.4.1 Logging on CD728 mobile units
Press and hold the page button
on the base station until you hear several
signal tones. Now log on the new mobile unit to the base station within 90
seconds.
If the mobile unit has not yet been logged on to a base station, press the REG.
display button. Otherwise, press the MENU display button. Then select SYSTEM
from the menu and confirm with OK.
Press the OK display button once.
Now enter the PIN code of the base station (factory setting 0 0 0 0) and confirm
with OK. A search will now be carried out for the base station.
As soon as the base station has been found, the internal number that has been
allocated to the mobile unit will appear briefly in the display. The mobile unit is
logged on and can be used for external and internal calls. An internal number will
be automatically assigned to the mobile unit. The main mobile unit already logged
on has the internal number 1. All further mobile units that are logged on will be
numbered in the sequence in which they were logged on (internal phone numbers
2 to 4). This internal telephone number will be indicated on the right of the display
next to the name.
11.4.2 Logging on other DECT-GAP telephones to the base station
In order to log on a DECT-GAP mobile unit from another manufacturer, follow the
instructions in the other supplier's operating manual and then press the
button
until you hear several signal tones.
Use the PIN-Code 0 0 0 0 to log on.
Due to the large number of different mobile units, it is not possible to guarantee all
the functions provided.
… 135 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel CD728 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel CD728 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info