687910

Switel CD728 Manual

121
Zoom out
Zoom in
Previous page
1/140
Next page
- Extras -
121
6.2 Internal room monitoring (baby phone)
With room monitoring, you can listen in to another room using a second mobile unit. A
second mobile unit is always required for this purpose. You will find further information
on using additional mobile units in Chapter 11.
Switching on the baby phone on the mobile unit
Press the MENU display button, select EXTRAS with the cursor and confirm with
the OK display button.
Select the BABY MONITOR setting and press the OK display button.
Choose the ON setting and confirm with the OK display button. The internal room
monitoring is now activated. An appropriate message will appear in the display.
Now place the mobile unit in the room that you want to monitor. In order to listen in to
the room, dial the internal number of the mobile unit. The call will be accepted directly
without ringing and you will be able to listen in to the room. To cancel room monitoring,
terminate the call with the
button. You can listen in to the room again at any
time by dialling the internal number of the mobile unit.
Switching off the baby phone on the mobile unit
You can switch off the BABY PHONE function with the CANCEL display button and
then OK.
6.3 Walkie-talkie
When you use several Type CD728 handsets, you can use the mobile units as walkie-
talkies. In the walkie-talkie mode, the mobile units are logged off from the base station.
You can therefore be as far away from the base station as you like. It is not possible to
receive external calls during this time. In order to use this function, several mobile units
must be switched to the walkie-talkie function. The range between two mobile units is
up to 50 m indoors and up to 300 m outdoors.
Preparing the mobile units
In order to use this function, you must switch each mobile unit individually to the
WALKIE-TALKIE function.
Press the MENU display button, select EXTRAS with the cursor and confirm with
the OK display button.
Select the WALKIE-TALKIE setting and press the OK display button.
Now select the number that the mobile unit is to be allocated during the WALKIE-
TALKIE function and confirm with OK. Repeat the procedure for the required
mobile units. The display buttons are now allocated the functions TALK and
CANCEL.
… 121 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel CD728 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel CD728 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info