Manual Switel CD728 (page 115 of 140) (English, German, French, Italian)

687910

115

Zoom out

Zoom in

1/140

- Operation -

115

4.15 R Signal button

If you have connected your telephone to a private exchange, you can use all the

facilities such as call transfer, automatic recall, etc. The "R" signal button gives you

access to these facilities. To do this, press the MORE display button and choose SEND

R and OK during a call.

The FLASH time "120ms" will be required on a private exchange (Adjustment, see 9.3).

You can find out from the dealer from whom the equipment was purchased whether

your telephone will work on your private exchange without any problems.

4.15.1 Using Pause

With private exchanges, it is necessary to dial a certain number (e.g. "9" or "0") in order

to obtain a dialling tone for an outside line on the extension. With some, older private

exchanges, it takes some time before the dialling tone can be heard. Especially for

these private exchanges, an automatic pause can be inserted after connecting to the

outside line so that you can dial directly without waiting for the dialling tone.

Entering a pause when dialling manually

Press and hold the redial button

for 2 seconds between the number for the

outside line and the actual telephone number. The letter P will appear in the display.

After connecting to an outside line your telephone will wait for 3 seconds before dialling

the actual telephone number.

The pause can also be saved with numbers in the phone book.

NOTE: If an automatic outside line code is activated, the pause will be inserted

automatically. You will find more information in Chapter 9.6.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Switel CD728 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Switel CD728 Manual

Product: