488805
75
Zoom out
Zoom in
Previous page
1/84
Next page
- Special functions -
75
8.1.5 Changing the background picture
The background picture for the main display can be changed here. Five different background pictures are
available.
8.1.6 Changing the menu colour
The background colour for the menu can be set to blue, green or pink.
8.1.7 Automatic call accept
Incoming calls are accepted automatically when you lift the receiver from the base station. If you only want
calls to be accepted by means of the call button, you can deactivate the automatic acceptance facility.
8.2 Base settings
Base Volume
Recall Mode
System PIN
Handset Priority
Base settings
Base Ringtone
8.2.1 Setting the base station ring tone
The base station can also respond with five different ring tones when a call comes through.
8.2.2 Ring tone volume on the base station
The volume of the ring tone on the base station can be adjusted in five steps. If at any time you do not want to
be disturbed, you can also turn the ring tone off altogether.
8.2.3 Ring priority
When multiple mobile units are used, you can specify one mobile unit to ring before the other mobile units.
You can also select the base station if you have a cord-connected telephone connected in parallel, for
example. In this case, the telephone and the base station will ring first before the mobile units. The number of
rings before the other mobile units ring can also be set. Even when a mobile unit does not ring, the incoming
call is visually signalled at the mobile unit and can also be accepted there.
8.2.4 Setting the recall mode (flash time)
If you have connected your telephone to a private exchange, you can use all the facilities such as call transfer,
automatic recall, etc. The "R" signal button gives you access to these facilities. The FLASH time "90ms"
(RECALL 1, factory Setting) or "250ms" (RECALL2) will be required on a private exchange. You can find out
from the dealer from whom the equipment was purchased whether your telephone will work on your private
exchange without any problems.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel CD727 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel CD727 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info