687824

Switel BF300 Manual

15
Zoom out
Zoom in
Previous page
1/20
Next page
15
5 Operation
Turning on/off
To turn on the unit, briefly depress the ON/OFF button.
To turn off the unit, keep the ON/OFF button pressed for 3 seconds.
Auto Off
The unit turns itself off after 30 minutes of idling (no button pressed).
Toggling between Celsius (°C) and Fahrenheit (°F)
Press the °C/°F button to toggle the display between °C and °F.
Saving optimal temperatures
1. The thermometer can store up to 4 different temperatures.
2. Write down the temperatures of various foodstuffs (e.g. milk, fennel tea, food in jars, etc.).
Many packages state the optimal temperature.
3. Repeatedly press the MEMORY button to select one of the memory locations M1 − M4.
4. Keep button + or − pressed for 2 seconds to enable the programming mode. A signal is soun-
ded and the optimal temperature on the display starts flashing.
5. Press + or − to set a temperature, then press MEMORY to store it. Otherwise, the preset tem-
perature will be stored after 9 seconds.
Measuring the temperature
1. Prior to measuring, carefully stir the heated food.
2. Select an optimal temperature from locations M1 - M4.
3. Pull the sleeve off the dip stick.
4. Clip the thermometer to the bottle or jar. The temperature is displayed.
Note: The dip stick must not touch the bottom of the bottle or jar. This might corrupt the result.
The temperature is displayed.
If the temperature bar is "optimal" (see Fig. 1), the temperature of the baby food
(food or drink) is within the optimal range. A sequence of acoustic signals is indicative
of the temperature being optimal.
If the temperature bar is "too hot" (see Fig. 2), the temperature is above the
optimal range. Allow the baby food to cool down a little and take the temperature
again.
If the temperature bar is "too cold" (see Fig. 3), the temperature is below the
optimal range. Warm up the baby food, e.g. by placing the bottle or jar in a suitable
container with hot water, and take the temperature again.
Fig. 1 (optimal) Fig. 2 (too hot) Fig. 3 (too cold)
Every bar icon (, or ) represents 1 °C of precision.
5. After use, wipe the dip stick with a damp cloth and put the sleeve back on.
Reset
Press the RESET button if the display is wrong or the unit fails to respond. Replace the
battery if this does not remedy the fault.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel BF300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel BF300 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info