687823
46
Zoom out
Zoom in
Previous page
1/54
Next page
36
Installazione
Alimentazione - Uso dell'alimentazione CA
1. Inserire un'estremità dell'adattatore di alimentazione in dotazione in una
presa di corrente e l'altra estremità nella parte posteriore della videocamera.
Vedere la Fig. 3.
Nota : Con questa videocamera, usare l'adattatore con l'etichetta OUTPUT: 6V DC.
2. Premere il tasto POWER e tenerlo premuto per circa 3 secondi per
accendere la videocamera. Il LED della videocamera si accende (spia verde).
Vedere la Fig. 3.
Nota : Premere il tasto POWER e tenerlo premuto per circa 3 secondi per
spegnere la videocamera.
Sintonia fine
Posizionare la videocamera in un luogo comodo e puntare l'obiettivo verso l'area
di osservazione.
Visione notturna
La videocamera dispone di otto LCD ad alta intensità per acquisire immagini
nitide al buio. Quando il sensore luci rileva bassi livelli di luce ambientale, gli
LCD si attivano automaticamente.
Misurazione della temperatura ambientale
Il sensore di temperatura è in grado di misurare la temperatura ambientale sul
lato della videocamera e l'indicatore della temperatura ambientale viene
visualizzato sullo schermo del monitor.
Impostazione della videocamera
1
1.1
1.2
1.3
1.4
Alimentazione
domestica.
Inserimento della batteria
1. Aprire il coperchio del vano batterie sulla parte posteriore del monitor. Vedere la Fig. 4.
2. Inserire la batteria con la parte metallica rivolta verso il vano batteria. Vedere la Fig. 4.
3. Chiudere il coperchio del vano batteria e assicurarsi che sia bloccato saldamente.
4. Premere il tasto POWER e tenerlo premuto per circa 3 secondi per
accendere il monitor. Vedere la Fig. 4.
Nota 1: "
( )
Nota 2: Premere il tasto POWER e tenerlo premuto per circa 3 secondi per
spegnere il monitor.
Impostazione del monitor
Il monitor usa una batteria a 3,7 V 1100 mAH (ioni di litio) o la corrente CA
Se l'alimentazione è sufficiente, il LED di alimentazione si accende
spia verde ; se la batteria è quasi scarica, il LED rosso inizia a lampeggiare.
2.1
2
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel BCF990 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel BCF990 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info