687800

Switel BCF810 Manual

59
Zoom out
Zoom in
Previous page
1/68
Next page
Operating the Transmitter
59
4 Operating the Transmitter
Check the transmitter and receiver are working properly each time before the
equipment is put into operation.
Switching the transmitter on/off
Position the transmitter in a good position for the monitoring tasks required and
align the camera lens to the area to be monitored.
Slide the switch to ON.
The Power LED lights up green. The transmitter is now ready to operate.
To switch the unit off, slide the switch to OFF.
In the case of a low battery voltage, the Power LED flashes slowly.
In this event replace the 4 x AAA batteries with fresh alkaline cells.
Connecting and aligning the transmitter
Attention: Position the transmitter with a minimum distance of 1 m to other elec-
tronic devices, otherwise there is a risk of mutual disturbance. Point the upper sec-
tion of the transmitter towards the baby or object you want to monitor. Check that
the baby or object is suitably displayed on the receiver.
Night vision
The transmitter is equipped with 4 infrared diodes. This enables the transmission of
pictures from areas which are not illuminated. The night vision function is activated
automatically when the light conditions make it necessary.
When the night−time vision function is activated, the screen display on the receiver
turns to black and white.
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel BCF810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel BCF810 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info