687789

Switel BCF800 Manual

41
Zoom out
Zoom in
Previous page
1/48
Next page
Putting the Units into Operation
41
Connecting the receiver
Attention: Position the receiver with a minimum distance of 1 m to other electronic devices,
otherwise there is a risk of mutual disturbance.
Operating with a power adapter plug
Connect the receiver as illustrated in the diagram. For safety reasons, only use the power adapter plug
supplied.
Mains power outlet
Attention: Use the power adapter plug labelled Model No. CSD 0750150G with output data:
7.5 V, 150 mA for the receiver.
Operation with batteries or rechargeable batteries
Remove the belt clip, if necessary (see below).
Open the battery compartment on the rear side of the re-
ceiver.
Insert the rechargeable or standard batteries paying atten-
tion to correct polarity. Refer to the diagrams in the battery
compartment.
Close the battery compartment again.
Reattach the belt clip, if necessary.
The receiver can be operated with 4 AAA" batteries (not contained in the material supplied)
or with rechargeable batteries of the same type. Rechargeable batteries can be recharged di-
rectly in the receiver when it is inserted in the charging station.
Attention: Personal injury and/or equipment damage is possible!
Do not
place the device in the charging station if standard batteries are installed.
There is a risk of the device exploding and/or becoming excessively hot.
If the battery power becomes too low, LEDs light up alternately. The batteries must be recharged/re-
placed.
Attaching/Detaching the belt clip / wall mounting bracket
Slide the belt clip downwards on the back of the receiver until it audibly snaps into place. To remove it,
release the fit by pulling the belt clip out of the catch and sliding it upwards.
Registering the receiver and transmitter / Establishing a connection
The receiver and transmitter are registered. If necessary, registration can also be completed manually:
1. Switch the transmitter and receiver on.
2. Press the MENU button on the receiver and keep it pressed until the
Connection LED flashes.
3. Press the Registration button on the transmitter briefly. The Connection LED also flashes.
When a connection is established, the image viewed by the lens appears in the display.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel BCF800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel BCF800 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info