687783
10
Zoom out
Zoom in
Previous page
1/40
Next page
Setup
Camera Setup
Power Supply
The camera uses either 4 AA-Size batteries (alkaline battery recommended)
or the household AC power current.
Loading the Batteries
1.Open the battery compartment cover on the rear of the camera. See Fig. 3.
2.Insert 4 AA-size batteries (follow the plus (+) and minus (-) signs on the
diagram inside the battery compartment). See Fig. 3.
3.Close the battery compartment cover, and make sure it is locked securely.
Note 1: Do not mix old batteries with new ones.
Note 2: Remove the batteries from the camera if you do not plan to use it for
a longer period of time.
4.Slide the POWER switch to the ON position. See Fig. 3.
Using AC Power
1.Plug one end of the provided power adapter into a wall outlet and the other end
into the bottom of the camera. See Fig. 4.
Note: Use the adapter labeled OUTPUT: 6V DC with the camera.
2.Slide the ON/OFF switch to the ON position. See Fig. 4.
Fine Tuning
Place the camera in a convenient location, point the lens towards the observation
area and adjust the angle by rotating the lens head. See Fig. 5.
Wall Mounting the Camera
Note: The monitor reception should be tested before fixing the camera in
place. Have someone hold the camera against the wall in the selected
mounting area while you check the reception on the monitor. If interferences
or other problems occur, refer to the Troubleshooting section. You may need
to select a different location in the room for mounting the camera.
1. Drill two holes 52mm apart, at the camera mounting position. See Fig. 6.
2. Fix the provided mounting clip to the wall using the masonry plugs and
fixing screws supplied. See Fig. 6.
3. Place the camera against the mounting clip so that the studs on the mounting
clip are aligned with the keyhole on the back of the camera. Move the
camera down to slide the studs into the cutout channels. See Fig. 6.
1.1
1
1.2
1.3
2
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel BCF4368 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel BCF4368 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info