535118
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
Operation
4 Operation
Once you have set up your baby monitor, you will be able to hear the sounds in your baby´s room
through the parent unit. You will also be able to see those sounds as the green sound sensor lights
around the top of the parent unit, which rise and fall with the volume level.
a Note: If the connection between the parent unit and baby unit is broken at any time the green
“Link“ light on the parent unit will flash and the green sensor light will cease to react to any
sounds. To reestablish the “Link“, follow the directions in the “Troubleshooting“ chapter.
Powering on/off the baby monitor
After having connected the baby monitor you will have to switch on both units. Press the On/Off key
on each unit. To switch off the unit press and hold down the On/Off key.
Volume
You can adjust the volume at which you hear your baby by using the keys and on the parent
unit. This will not effect the sensitivity of your baby monitor, only the volume at which you hear those
sounds through the parent unit.
Battery charge indicator and battery low warning
The parent unit will work up to 10 hours out of the charger pod, but this depends on the level of
charge in the batteries. The charge level is indicated by the battery icon on the Display. If the charge
becomes low, a “battery low warning beep“ will sound and the battery icon on the parent unit´s
Display will begin to flash. If this occurs you should return the parent unit to the charger pod to
recharge the batteries. You can still use your parent unit from the charger pod.
On the display you can see the charging status:
Battery icon filled = full capacity
Battery icon 2/3 filled = approx.half capacity
Battery icon 1/3 filled = batteries nearly exhausted
Battery icon not filled / frame flashes = batteries must be charged
Sound alert
You can set your parent unit to give an extra warning “beep“ should the noise levels in your baby’s
room activate the light on the sound sensor. This is particularly useful if the volume of your parent
unit is turned down and you are just using the sensor light to monitor the noise levels in your baby’s
room.
Parent to parent paging
Useful if one parent is in the baby’s room and needs to contact the other. Also helps to find a mislaid
parent unit.
At the baby unit
Press and hold the Page Key for 2 seconds. The parent unit will emit a tone. The tone can be swit-
ched off by pressing any key on the parent unit or by pressing the page key on the baby unit once
again.
Night light
The baby unit has a night light which emits a soft starry glow, providing comfort and reassurance
for your baby and allowing you to see them in a darkened room. You may also turn the night light on
and off from the parent unit.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel BCC 58 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel BCC 58 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Switel BCC 58

Switel BCC 58 User Manual - German, French, Italian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info