Manual Switel BCC 50 (page 43 of 52) (English, German, French, Italian)

535101

Zoom out

Zoom in

1/52

5 Operation

1. Transmitter unit

In order that the transmitter (unit for the baby) and receiver (unit for

the adult) can communicate with each other, they must both be set to

the same memory channel (M1−M15).

Sensitivity control (VOX)

The sensitivity control is used to set the noise level at which the

transmitter should begin transmitting noises detected.

1 kHz beep signal

In order to be sure the transmitter is working properly, activate this

feature so that it sends a beep signal every 30 seconds.

Automatic monitoring

The transmitter can be set up so that it activates the microphone for

5 seconds every 5 minutes and transmits the noises detected to the

receiver.

Alert signal

The transmitter can be set up so that it sends an alert signal before

transmitting the noises detected.

 The display flashes while completing the settings de-

scribed below; it returns to a constant display after a few

seconds. This means that the setting made has been

saved.

Switch on

Switch off

Set the switch (3) to I".

Note: The display indicates the current

channel or memory channel.

Set the switch (3) to 0".

Note: The display goes out.

Set the mem-

ory channel

Press the Menu button (5) twice;

use buttons (7,4) to select a mem−

ory channel (M1−M15).

Note: M" appears in the display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Switel BCC 50 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Switel BCC 50 Manual

Product: