761956

Swissvoice CP2502 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
Program DSS keys
:
1. You can use the phone web interface to configure these keys ,
or
2. You can go to Menu > 3 Settings > 1 Basic Settings > 1 Keyboard > 1 DSS Key settings.
Select the key, function and value if needed and press Save.
Program other keys :
1. You can also configure shortcuts for the navigation keys, and which softkeys will be displayed in
idle mode.
2. To do so, go to Menu > 3 Settings > 1 Basic Settings > 1 Keyboard, select among the possible
configurable items, and select your desired value and press Save.
1. Press Menu > 2 Features > 1 Call Forward.
2. Select the line, the type of forward, enter the destination number and status and Save.
1. Press Menu to check phone IP address > 1 Status > 2 IP .
2. Open a web browser on your computer. Enter http:// and the IP address in the address bar and
validate.
3. Default login and password are « admin/admin » for administrator.
4. Minimum config is sip account. Check administrator guide or details.
• Pre-dialling : enter the phone number and pick up the handset.
• Direct dialling : lift the handset and enter the phone number.
• Handsfree : enter phone number and press or vice versa .
• Headset : enter phone number and press or vice versa.
• Press Hold. To retrieve the call press Resume soft key.
Note : with more than one active call, select desired call with the navigator keys and use the
corresponding soft key to hold or resume.
• Press Menu soft key > 3 Settings > 1 Basic Settings > 7 Language .
• Select the desired language and press .
Attended transfer :
1. Press Transfer soft key during the active conversation, the call is put on hold.
2. Dial the second telephone number.
3. When the call is answered, then press Transfer soft key to complete the operation.
Blind transfer :
1. Press Transfer soft key during the active conversation, the call will be on hold.
2. Then enter the 2nd telephone number and press Transfer soft key.
• With the handset : pick up the handset.
• With a headset : press .
• With the handsfree : press .
Phone web interface
Language setting
Making a call
Accepting a call
Putting a call on hold
3-party conference
Call transfer
1. Once in line with 1st caller, press Conf soft key, 1st caller is put on hold.
2. Then call the 2nd number.
3. After, 2nd call is established, press Conf soft key to set up the conference.
1. Press up navigation key or Menu > 6 Call Logs > 1 Local Call Logs.
2. Scroll through the list using .
3. To dial an entry, press Dial soft key or pickup handset or press or .
Access phonebook :
1. Press Dir soft key.
2. Select Contacts or other phonebook.
To dial an entry, press Dial soft key or pickup handset or press or .
Add new entry :
1. Press Dir soft key > 1 Contacts > Press Add.
2. Enter name and number and press Save soft key.
1. Press , select the desired call and press Dial soft key or pickup handset or press or .
1. To access your voice mailbox, press , number of messages will be indicated if provided by your
server or pbx. .
2. Select the line and press Dial to call .
1. Press DND softkey, or Menu > 2 Features > 5 DND.
2. Select the line and status, and press Save soft key.
Call list
Phonebook
Call forward
Redial
Do not disturb
Programmable keys
Voice mail
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swissvoice CP2502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swissvoice CP2502 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Swissvoice CP2502

Swissvoice CP2502 Quick start guide - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info