567886
26
Zoom out
Zoom in
Previous page
1/40
Next page
Connecting the telephone
Connect the receiver cable with the telephone receiver and the other end to the
jack on the left side of the telephone.
Use the telephone connecting cable to connect the telephone to the telephone
socket or the connection to the telephone system.
Wall assembly
Measure and mark the holes for the wall assembly in accordance with the underside of
the telephone.
Make sure that no cables run in the vicinity of the drilling point (electric, telephone,
antenna, water or heating). If you are not sure, choose another assembly location or,
using an applicable measuring device, check for possible existing cables.
Use appropriate screws, the heads of which fit into the mountings on the base of the
telephone.
Hang the telephone on the slightly protruding screw heads.
Check to see if the telephone can easily slide upwards. If yes, then remove the tele-
phone and turn in the screws a little further. Place the telephone on the screws again
and, as necessary, repeat the procedure.
Note
It is possible that black colouring/stripes appear on the surface because of the rubber
feet on the underside of the telephone. If you want to prevent this, we recommend that
you place something appropriate between the wall and telephone.
Display
If there is an entry in the telephone directory (and transmission of the call number is
available at your connection), the display gives you information such as date and time,
as well as the telephone number of incoming calls and name of the caller.
Also, it assists you in the setting/programming of the telephone using a user menu. For
further information, please refer to the Chapter "Setting-up Telephone".
When the telephone is in idle state, you can view the day, date and time, as well as
the combined number of non-accepted and accepted calls (ALL) and the number of the
non-accepted calls (NEW). For details, refer to Chapter "Call List".
Swissvoice CP110
4 Swissvoice CP110
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swissvoice CP110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swissvoice CP110 in the language / languages: English, German as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info