53171

Sweex IEEE 802.11g Wireless Router Manual

25
Zoom out
Zoom in
Previous page
1/42
Next page
802.11g Wireless Router User’s Manual
24
Configuring the basic wireless settings
Follow the instructions below to set up and test basic wireless connectivity. Once you have established
basic wireless connectivity, you can enable security settings appropriate to your needs.
1. Connect to the wireless router at its default IP address of http://192.168.62.1, or using whatever LAN
IP address you have set up.
2. Click
“Advanced Setup”
, then key-in default user name of
“admin”
and default password of
“1234”
,
or using whatever password you have set up.
3. Click “LAN” in the main menu, and then click “Wireless”.
4. Make sure the box next to “Enable Wireless” is checked.
5. Keep the default setting on Mode setting, which is “MIXED”.
6. Choose a suitable description name for the wireless network name (ESSID) or keep it default. In the
ESSID box, enter a value of up to 32 alphanumeric characters.
7. Set the Channel or keep it default. The default channel is 6.
8. Keep all other fields in default settings.
9. Click “APPLY” button to save your changes.
10. Configure and test your PCs for wireless connectivity. Check the wireless adapter of your PCs to have
a wireless link and are able to obtain an IP address by DHCP from the wireless router.
Once your PCs have basic wireless connectivity to the wireless router, then you can configure the advanced
wireless security functions of the wireless router.
Configuring WEP
Follow the instructions below to set up WEP data encryption:
Important! If you use a wireless PC to configure WEP settings, you will be disconnected when you click
on APPLY. You must then either configure your wireless adapter to match the Router WEP settings or
access the Router from a wired PC to make any further changes.
1. Connect to the wireless router at its default IP address of http://192.168.62.1, or using whatever LAN
IP address you have set up.
2. Click “Advanced Setup”, then key-in default user name of “admin” and default password of “1234”,
or using whatever password you have set up.
3. Click “LAN” in the main menu, and then click “Wireless”.
4. Click “Security Setting”.
5. Check the box next to
“Enable”, and click “Set
WEP Keys”.
6. Form the setup screen, select
the level of WEP encryption
you wish to use, 64 Bit or 128
Bit.
7. You can automatically or
manually program the
encryption keys. These values
must be identical on all PCs
and wireless router.
- Automatic: Enter a word or group of printable characters in the Passphrase box and click the
Generate button. These characters are case sensitive.
- Manually: There are two different key formats, Alphanumeric (also called ASCII) and
Hexadecimal
. For 64-bit WEP, enter 5 characters in Alphanumeric format, or 10 digits (any
combination of 0-9, a-f, or A-F) in Hexadecimal format. For 128-bit WEP, enter 13 characters in
Alphanumeric format, or 26 digits (any combination of 0-9, a-f, or A-F) in Hexadecimal format.
- Default TX Key: Select which WEP Key (1~4) will be used when the Router sends data. Make
sure the receiving device is using the same key.
8. Click “Apply” button to save your settings.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sweex IEEE 802.11g Wireless Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sweex IEEE 802.11g Wireless Router in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info