664339
7
Zoom out
Zoom in
Previous page
1/12
Next page
7
HOW TO USE
6. Tip: You can also start the grinding or brewing procedure at any time before the set
starting time. To do this, press the Programme button once to switch off the timer and
then press the On/Off button to start the grinding or brewing procedure manually.
7. After the brewing procedure, you can take the coffee pot from the hotplate and serve the
coffee.
8. After the brewing procedure, the hotplate remains on for another two hours and then
switches off automatically.
9. If you would like to turn off the coffee machine before the two hours are up, press the On/
Off button
10. Clean the device after use (see the “Maintenance” chapter).
Always remove the mains plug from the mains socket before you clean the device or change
the water filter.
• The hotplate is very hot after use! Let it cool down first before cleaning it.
• Never immerse the device, the cable or the plug in water.
• Do not use corrosive or abrasive cleaning agents to clean the device. These could
damage the surface.
MAINTENANCE
Cleaning the Device
1. Clean the coffee mill using the cleaning brush.
2. Adjust the screw at the opening for cleaning the cof-
fee mill with the shaft end of the cleaning brush to the
"Open" symbol . The cover will open up and you can then
remove any excess coffee powder with the cleaning brush.
3. Then close the cover again by pressing down on the cover and adjusting the screw on
the opening for cleaning the coffee mill with the shaft end
of the cleaning brush to the
"Closed" symbol .
4. Then press the unlocking button on the side of the device and open the filter compart-
ment.
5. Take out the permanent filter and dispose of the coffee powder.
6. Clean the permanent lter and the filter compartment insert with hot water and a little
detergent if necessary.
7. Then dry all parts thoroughly and place them in the coffee machine again.
8. If necessary, clean the coffee machine and hotplat
e with a damp cloth and then with a dry
one.
SK32020N_IM.indd 7 14/10/2014 07:58
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swan SK32020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swan SK32020 in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info