Manual Swan SI9060 (page 7 of 12) (English)

664350

Zoom out

Zoom in

1/12

HOW TO USE

FILLING THE BOILER

1. Make sure the supply cord is unplugged from

the main socket.

2. Unscrew the safety valve. (Fig.5)

3. Fill the boiler with water using refill cup. (Fig.6)

4. Screw up the safety valve fully. (Fig.7)

5. IMPORTANT: never unscrew the safety

valve with the boiler under pressure. See

safeguards on page 3

6. After use, put iron unit back on the base unit,

turn temperature control knob to“MIN”and

turn off power switch on the control panel.

Fig.5

Fig.6 Fig.7

Fig.5

Fig.6 Fig.7

STEAM IRONING

1. Before steam ironing, make sure the fabric is suitable for this kind of ironing. The

machine works with normal tap water if you live in a soft water area. Use bottled

or distilled water if you live in a hard water area. Refer to the Map on the inner lid

of the retail box for more information.

2. Fill boiler with clean tap water as above filling instruction.

3. Connect the appliance into a suitable socket outlet, and press down the power

switch on the control panel. The heating indicator light will light up to indicate that

the unit has been connected to the power supply.

4. Set temperature control knob to steam ironing position according to fabric

setting chart mentioned above. Heating indicator light on iron unit lights up to

indicate the unit is being heated up. When the heating indicator light turns off,

the desired temperature has been reached. It is ready for steam ironing. During

use, the heating indicator light cycle from on to off. (For every first time use,

please pre-heat for 3 minutes to ensure even temperature across the soleplate)

SI9060N_IM.indd 7 22/04/2014 09:12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Swan SI9060 in the language / languages: English as an attachment in your email.

The manual is 3,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Swan SI9060 Manual

Product: