664348
17
Zoom out
Zoom in
Previous page
1/20
Next page


1. The lter is designed to reduce the build-up of limescale which occurs during
steam ironing to prolong the working life of your iron. However, please
note that the lter will not completely stop the natural process of limescale
build-up.
2. The lter should be replaced with a new one after 2-3 months. The iron can still
be used with a clogged lter. However, limescale will most probably be built up
in the steam chamber. This happens depending on the quality of your local
water quality. You should replace the lter as soon as possible or mix your
water with 50% distilled water.

canti-cal
1. Disconnect the appliance from the power supply and allow the
appliance to cool down for at least 60 minutes.
2. After use, slide out the water tank and pour out all of the remaining water.
3. Wind the power cord around cord storage of the base unit.
4. The iron should be placed on the iron rest plate and they can be stored
together.
1. Unplug the appliance from the mains supply and let the iron cool down.
2. Clean the iron with a damp cloth.
3. Wipe off limescale and any other deposits from the soleplate with a damp cloth
or non-abrasive (liquid) cleaner.
4. Never clean the iron under the tap.


17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swan SI9032 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swan SI9032 in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info