664348
9
Zoom out
Zoom in
Previous page
1/20
Next page
1. Follow the ironing instructions on the garment label. If there is no
instruction label, but you know what kind of fabric it is, please refer to the fabric
setting chart described opposite.
2. The fabric setting chart is only valid for plain fabrics and not for materials to which
nishes, glosses etc, have been applied. Textiles to which some kind of nish has
been applied (gloss, crinkle, relief etc.) is best ironed at a lower temperature.
3. First sort laundry according to ironing temperature setting guide: wool with wool,
cotton with cotton, etc.
4. The iron heats up more quickly than it cools down. Therefore, start ironing articles
that need to be ironed at the lowest temperature, such as those made of
synthetic bres.
5. If the fabric consists of various kinds of bres, always select the temperature
required by the most delicate bres, i.e. the lowest temperature. If, for example,
an article consists of 60% polyester and 40% cotton, according to the fabric setting
chart it should be ironed for polyester.
6. If you do not know what kind of fabric the article is made of, iron a piece of the
material which is not visible when you wear it to nd out the appropriate
temperature for your articles.
7. Pure woolen fabrics (100% wool) should be ironed with the iron setting to steam
ironing position. It is advisable to set the selection control button to "COTTON"
position and use a dry pressing cloth.
8. When steam ironing woolen fabrics, shiny patches may occur. You may prevent
this by turning the article inside out and ironing the reverse side.
9. After using steam ironing for cotton fabrics, do not iron articles requiring a lower
temperature (such as nylon etc.) immediately. It is advisable to adjust the selection
button to the lower setting, waiting for about 2-4 minutes until the blue indicator
light turns off, and then you can start ironing.
Important Hints
Do not ll water tank with vinegar, starch, chemically descaled water or
descaling agents.




9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swan SI9032 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swan SI9032 in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info