664348
4
Zoom out
Zoom in
Previous page
1/20
Next page
1. Make sure to read all the safety precautions below and look at the illustrations
before you start using the appliance.
2. Use the appliance for its intended use only.
3. The appliance is intended for household use only.
4. In order to protect against the risk of electric shock, do not immerse iron power
base into water or any other liquids
5. Connect the appliance only to an alternating current of the voltage specied on
the rating plate and only to an earthed socket. To avoid a circuit overload, do not
operate another high wattage appliance in the same circuit.
6. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
7. During use, do not lift the appliance by power cord/supply hose.
8. Always disconnect the plug of the appliance from electrical outlet when lling with
water or emptying and when not in use.
9. Do not operate the appliance with a damaged cord or if the appliance has been
dropped or damaged, it must be taken to a qualied serviceman or manufacturer or
its service agent for examination and repair. Incorrect re-assembly can cause a risk
of electric shock when the iron is used.
10. Keep the iron and its cord out of reach of children less than 8 years of age when it
is energized or cooling down.
11. During use, always place the power base on a stable, level and horizontal surface
or ironing board, and then place the iron on the power base.
12. Place the iron on the power base. Do not allow power cord or supply hose to
touch hot surface.
13. Burns can occur from touching hot metal parts, hot water or steam. Use caution
when using the appliance. If the iron is placed onto the iron rest plate during in use,
the iron rest plate may become a hot surface. Do not touch the iron rest plate and
the soleplate until they have cooled down completely.
14. Never use the iron facing towards people because the steam can cause burns.
15. Never twist the supply hose during use.


4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swan SI9032 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swan SI9032 in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info