664346
6
Zoom out
Zoom in
Previous page
1/8
Next page
6
IRONING TIPS
Always check first whether a label with ironing instructions is attached to the article.
The iron heats up quicker than it cools down, therefore, you should start ironing the articles
requiring the lowest temperature such as those made of synthetic fibres.
If the fabric consists of various kinds of fibres, you must always select the lowest ironing
temperature to iron the composition of those fibres.
Silk and other fabrics that are likely to become shiny should be ironed on the inner side.
Velvet and other textures that rapidly become shiny should be ironed in one direction with light
pressure applied. Always keep the iron moving at any given moment.
Pure woollen fabrics (100% wool) may be ironed with the iron set a steam position. Preferably
set steam button to the maximum position and use a dry cloth as a mat.
Note: when ironing woolen fabrics, shining of the fabric may occur. So it is suggested that you
should turn the article inside out and iron the reverse side.
AFTER IRONING
1. Take out the water tank, remove the limescale filter and empty all the water out, replace the filter then
place tank back into the iron base (fig 2 - 6).
2. With the tank empty, press down the steam surge button button a couple of times to remove any
remaining water in the interconnecting cord, then place the iron back on the base. Warning: the soleplate
is still hot, be careful!
3. Turn the temperature dial back to 0 position and unplug from the mains socket. Allow the iron to
completely cool before cleaning. Note: you can wipe the surface of unit clean with a soft cloth. Try not to
dislodge the silicone cushion out of it’s mountings because it is difficult to fit back!
Warning: do not immerse the steam iron or stand in water or other liquids.
AUTO-DESCALING FEATURE
There is a limescale filter inside the tank. The filter can absorb insoluble calcium ions and convert them
to soluble natrium ions, which makes the water softer. This greatly reduces the build-up of limescale.
However, if you do live in a hard water area, the life of your iron will increase significantly if you use bottled
water.
Note: to keep the soleplate smooth, never let any metal materials rub against it.
REPLACE THE LIMESCALE FILTER EVERY 3 MONTHS OR MORE REGULARLY IF YOU LIVE IN A HARD
WATER AREA. VISIT WWW.SWAN-BRAND.CO.UK FOR SPARE FILTERS
SI9021N_IM.indd 6 28/10/2014 10:45
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swan SI9021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swan SI9021 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info