664341
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
GETTING STARTED
PRIMING THE PUMP
OK so your Steam Generator Iron is now switched on and heating up nicely. When the
indicator light on the hand unit goes out, it has reached temperature.
1. Lift the iron from the base
2. Hold it lower than the base (on first time use like this, gravity helps to get water
to the hand unit more quickly)
3. Press and HOLD the steam release button for up to 30 seconds
4. The pump will make a vibration noise that will become quieter as it becomes
primed with water.
5. When fully primed and ready, steam (and lots of it) will come from the hand unit
and the pump will make a quiet pulsing noise.
6. If this is the first time use, we recommend ironing a piece of scrap linen or cotton
material to ensure any residual material from the manufacturing process is
removed from the iron and soleplate.
7. Your new iron is now primed and ready for work!
Please refer to the ironing temperature guide below. When you begin your ironing
session, start with the LOWER temperature fabrics first because the iron takes
longer to cool down than it does to heat up.
If you need to go from high temperature to low temperature then:
• Set the thermostat to lower temperature (NOTE: there is no steam function on
the very low settings)
• Wait for the indicator light on the hand unit to cycle on and off TWICE. This
ensures the sole plate is an even temperature.
Nylon
Synthetic
Acrylic
Acetate
Silk
Wool
Polyester
Rayon
Cotton
Linen
Max
Cotton,
Linen
Synthetic
Wool Silk
Cotton
Steam Ironing Steam Ironing
Dry iron on the
opposite side of
the fabric.
Use a press cloth
and steam iron
on the opposite
side of the fabric
/ / /
SI11010N_IM.indd 6 01/05/2014 11:34
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swan SI11010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swan SI11010 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info