628325

SV Italia SAB Italia Manual

16
Zoom out
Zoom in
Previous page
1/22
Next page
Manuale Utente – User manual – Macchina caffè modello SOPHIA
ed 2014-01 – Pag 16 di 22
Con riserva di modifica - Specification subject to change
Continuous coffee dispensing
Starting from the STAND-BY state, press (for a time less than 5 seconds) and then release the “E” button
and the machine will start the delivery from the group which you pressed the button, activating the solenoid
valve and pump, the led of the pressed key will be on.
The display shows “Pouring Continuous”
To stop the dispensing, press any key of volumetric dose on the group that is in delivering, the dose will be
stopped and the machine turn back in STAND-BY mode and the leds result to be on.
Steam dispensing
The hot steam is dispensed from the steam wand.(fig. 1-5) by turning the steam handle (fig.1-1).
Caution: The wand becomes extremely hot during steaming and can cause burns. Do not touch !!
To avoid milk rests to dry on the wand, we strongly recommend to clean the wand with a humid non
abrasive cloth after every use. Pay attention during this operation: the wand becomes extremely hot during
steaming and can cause burns.
Setting
Programming is done on STAND-BY machine ready to operate, press “E” continuous/programming key and
keep it pressed for more than 5 seconds and check that all keyboards’ led are blinking.
The display shows “ Programming Select Within30s”
Press within 30 seconds (programming time-out) any of the keys related to the 4 programmable doses (A B
C D) or tea dose (F), the machine begin to dispense and the key “E” led remains light on together with the
key dose in programming. The display shows “Programming Espresso” or “Programming Tea Water”
When the desired quantity is reached, press any of the coffee keys or the tea/water key on the keyboard
related to the group under programming to stop the dispensation. The new dose value is memorized, at the
same time the led related to the programmed dose switched off, while the remaining leds light blinking, it is
possible now to proceed with the other doses’ programming without repeating the entering procedures.
The display shows “Programming Select Within30s””
Repeat the steps to program the other doses.
Note: By programming the touch pad on left side of the machine from operator side , the same quantities are
automatically set on the other touch pads.
If you want to program the other touch pad with different quantities, it is necessary to repeat the
programming sequences on the second touch pad.
To exit programming phase without waiting the 30 seconds time-out expiring, press “E” key.
During the programming of one group, the others groups and tea dispensations remain disabled.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SV Italia SAB Italia at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SV Italia SAB Italia in the language / languages: English, Italian as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info