628326
27
Zoom out
Zoom in
Previous page
1/41
Next page
Manuale Utente User manual Gebrauchsanleitung - Macchina caffè modello ELLIPSE
ed 2011 Pag. 27 di 41
Con riserva di modifica - Specification subject to change Änderung vorbehalten
Switching off the machine
To switch off the machine it is necessary to press first key C and key E of the left touch pad.
Then turn the general switch from position 2 to position 0.
Note: If the espresso machine Ellipse is not used for a longer time, it has to be switched off,
disconnected from electrical supply and water mains. The boiler must be completely emptied. The
machines has to be carefully drained and stored in a dry location which is inaccessible to minors.
The machine must be dismantled by an authorized technician according local law and jurisdiction.
Maintenance
The following operations at user’s care are necessary, in order to get the best efficiency from your espresso
machine Standard Line and have its look unchanged:
Daily cleaning of the equipment
The manufacturer recommends the following at the end of each working day.
- Clean showers, group gaskets, group flange with a brush.
- Wash filters and filter handles in warm water adding a special detergent product (for use with coffee
machines).
- Put the filter holder with the blind filter in the coffee delivery group and press the button
for semiautomatic coffee production (“P”). Switch it off after 15 seconds. Remove the filter holder and
take the blind filter out. (There are special products for coffee machine’s group cleaning. Using these
products please follow manufacturer’s instructions. Do always rinse intensively after cleaning. Ask your
distributor if product is approved by ).
- Clean the cups tray and grid without removing the tray from the machine.
- Clean the hot steam wand and spout accurately with a clean non abrasive damp cloth after each single
use without touching it directly with any part of the body to avoid injury or damage due to the hot surface
of the spouts.
Caution: Hot surface.
- When necessary clean the metal parts of the bodywork carefully with a clean non abrasive cloth without
touching it directly with any part of the body to avoid injury or damage due to the hot surface of the
spouts.
Caution: Hot surfaces.
Turn the machine off prior to proceed to the following operations:
- Clean the drip tray and grid.
- Clean the plastic recipient located in the part under the drip tray. Use a spoon for this purpose.
- Clean the bodywork with a non abrasive damp cloth.
Never use aggressive products or alcohol.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SV Italia SAB Ellipse at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SV Italia SAB Ellipse in the language / languages: English, German, Italian as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info