453444
6
Zoom out
Zoom in
Previous page
1/15
Next page
7-6 CHASSIS
INSPECTION
WHEEL BEARINGS
Inspect the play of the wheel bearings by finger while they are in
the wheel. Rotate the inner race by finger to inspect for abnormal
noise and smooth rotation.
Replace the bearing in the following procedure if there is any-
thing unusual.
WHEEL BEARINGS REMOVAL
Remove the wheel bearings by using the special tool A or B.
% 09921-20220: A Bearing remover set (17 mm)
or 09941-50111: B Wheel bearing remover
!
The removed bearings should be replaced with new ones.
FRONT WHEEL
Make sure that the wheel runout (axial and radial) does not ex-
ceed the service limit when checked as shown. An excessive
amount of runout is usually due to worn or loose wheel bearings
and can be corrected by replacing the bearings. If bearing re-
placement fails to reduce the runout, replace the wheel with a
new one.
& Wheel rim runout (axial and radial)
Service Limit: 2.0 mm (0.08 in)
FRONT AXLE
Measure the front axle runout using the dial gauge. If the runout
exceeds the service limit, replace the front axle with a new one.
% 09900-20606: Dial gauge (1/100 mm)
09900-20701: Magnetic stand
09900-21304: V-block set (100 mm)
& Wheel axle runout
Service Limit: 0.25 mm (0.010 in)
TIRE ........................................................................... "2-18
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suzuki VL 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suzuki VL 800 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Suzuki VL 800

Suzuki VL 800 User Manual - English - 23 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 12 pages

Suzuki VL 800 User Manual - English - 6 pages

Suzuki VL 800 User Manual - English - 19 pages

Suzuki VL 800 User Manual - English - 14 pages

Suzuki VL 800 User Manual - English - 20 pages

Suzuki VL 800 User Manual - English - 11 pages

Suzuki VL 800 User Manual - English - 17 pages

Suzuki VL 800 User Manual - English - 23 pages

Suzuki VL 800 User Manual - German - 288 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info