453444
3
Zoom out
Zoom in
Previous page
1/11
Next page
5-20 FUEL AND LUBRICATION SYSTEM
CORRECT INCORRECT
CARBURETOR CLEANING
!
Some carburetor cleaning chemicals, especially diptype
soaking solutions, are very corrosive and must be
handled carefully. Always follow the chemical
manufacturer’s instructions on proper use, handling and
storage.
Clean all jets with a spray-type carburetor cleaner and dry them
using compressed air.
Clean all circuits of the carburetor thoroughly not just the
perceived problem area. Clean the circuits in the carburetor
body with a spray-type cleaner and allow each circuit to soak if
necessary to loosen dirt and varnish.
Blow the body dry using compressed air.
#
Do not use a wire to clean the jets or passageways. A
wire can damage the jets and passageways. If the com-
ponents cannot be cleaned with a spray cleaner, it may
be necessary to use a dip-type cleaning solution and al-
low them to soak. Always follow the chemical
manufacturer’s instructions for proper use and cleaning
of the carburetor components.
After cleaning, reassemble the carburetor with new seals and
gaskets.
CARBURETOR INSPECTION
Check the following items for any damage or clogging.
* Pilot jet * Float * Starter (enricher) jet
* Main jet * Needle valve * Gasket and O-ring
* Main air jet * Jet needle * Throttle shaft oil seal
* Pilot air jets * Valve seat * Pilot outlet and by-pass ports
* Needle jet air bleeding hole * Piston valve * Coasting valve
NEEDLE VALVE INSPECTION
If foreign matter is cought between the valve seat and the needle
valve, the gasoline will continue flowing and overflow. If the valve
seat and needle valve are worn beyond the permissible limits,
similar trouble will occur. Conversely, if the needle valve sticks,
the gasoline will not flow into the float chamber. Clean the float
chamber and float parts with gasoline. If the needle valve is worn,
as shown in the illustration, replace it along with a new valve
seat. Clean the fuel passage of the mixing chamber using com-
pressed air.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suzuki VL 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suzuki VL 800 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Suzuki VL 800

Suzuki VL 800 User Manual - English - 23 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 12 pages

Suzuki VL 800 User Manual - English - 6 pages

Suzuki VL 800 User Manual - English - 19 pages

Suzuki VL 800 User Manual - English - 14 pages

Suzuki VL 800 User Manual - English - 20 pages

Suzuki VL 800 User Manual - English - 15 pages

Suzuki VL 800 User Manual - English - 17 pages

Suzuki VL 800 User Manual - English - 23 pages

Suzuki VL 800 User Manual - German - 288 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info