542602
27
Zoom out
Zoom in
Previous page
1/41
Next page
27
The following information will be shown on three alternating displays:
DISPLAY I, main display:
- maximum depth
- dive time
- dive number
- altitude/ personal adjustment setting
- temperature at maximum depth
- a blinking SLOW if the diver has surfaced with this warning on
- ASC TIME symbol if the dive became a decompression dive
- downward pointing arrow if the ceiling was violated
DISPLAY II:
- surface interval time before dive
DISPLAY III:
- dive entry time and date
The data of the most recent dive is shown first. Preceding dives are recalled by
touching the TIME/MODE and COM contacts. A brief touch of the contact will bring
you to the previous dive, continuous contact scrolls backwards through the dives.
Only DISPLAY I is shown, while scrolling the dives. The desired dive is selected by
breaking the contact when that dive appears on the display.
When new dives are added (after approximately 25 hours of diving), the oldest dives
are deleted. The memory will always retain approximately the last 25 hours of dive
time. The contents of the memory will remain even when the battery is changed
(assuming that the replacement has been done according to the instructions).
Dive Profile Memory
The detailed profile of each dive shown in the logbook at that moment is accessed
by touching the ON/PLAN and COM contacts. Two LCD bar segments in the upper
right-hand corner shows that the SOLUTION
á
is now in the Dive Profile mode.
When in the Logbook mode, only one segment is shown.
The scrolling of the profile will start automatically. The dive time is displayed in one
minute increments with each display being shown for about 4 seconds. The depths
shown are the maximum values of each interval.
If the recording interval is set to 20 or 30 seconds, three or two maximum depths
values, respectively, are shown within each time increment. A new depth value is
marked with a beep. After the last depth figure of the selected profile, SOLUTION
á
automatically returns to the same dive in the logbook. If desired, the profile of the
same dive can be recalled again following the above procedure.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suunto Solution Alpha at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suunto Solution Alpha in the language / languages: English as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info