Manual Suunto Solution Alpha (page 24 of 41) (English)

542602

Zoom out

Zoom in

1/41

3.6 ERROR CONDITIONS

The SOLUTION

is provided with warning indicators that advise the user to react

to certain situations that would otherwise give rise to a significant increase risk of

DCS if left unattended. If you do not respond to its warnings, it will enter an ERROR

MODE, indicating the risk of DCS has greatly increased. If you understand and

operate the SOLUTION

sensibly, it is very unlikely you will ever put the

SOLUTION

into the ERROR MODE.

The ERROR MODE is shown by a blinking Er in the center display. Once in ERROR

MODE, the SOLUTION

will continue to display current depth and dive time. You

should immediately ascend to a depth of 3 to 6 m [10 to 20 ft] and remain at this

depth until air supply limitations require you to surface. When the surface has been

reached, no further diving should take place for a minimum of 48 hours.

Omitted Decompression

The most common ERROR MODE results from omitted decompression, when the

diver stays above the ceiling for more than three minutes. During this three minute

period the Er warning will blink and audible alarm beeps. The SOLUTION

will

continue to function normally if the diver descends below the ceiling within three

minutes. After this the SOLUTION

will enter a permanent ERROR MODE. In the

permanent ERROR MODE the SOLUTION

will not show no-decompression or

ascent times. Only a permanent Er warning is shown in the center window.

However, all the other displays will function as before, to provide information for

ascent. At the surface, the ASC TIME will be displayed in the center window.

Other ERROR MODES

Diving to a depth below 99 m [325 ft] will place the SOLUTION

in the ERROR

MODE.

An OVERFLOW ERROR (blinking OE in the center window) will be shown when the

microprocessor of SOLUTION

is not able to calculate any further nitrogen

absorption in one or several compartments. This will, however, only occur under

severe exposure conditions outside the limits of recreational diving. This feature can

be observed in simulator mode.

If the entire SOLUTION

display begins to blink, allow the computer to complete its

functional cycle and to deactivate. If, when reactivated, the display continues to

blink, do not use the computer. Return your SOLUTION

to your dealer for service.

The display will start to blink if the voltage of the battery drops occasionally to a

level which is not sufficient for the operation of the SOLUTION

. This may be due

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Suunto Solution Alpha in the language / languages: English as an attachment in your email.

The manual is 0,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Suunto Solution Alpha Manual

Product: