13
CHAPTER 2 TIME MODE
There are three time sub modes: time, chronometer and alarms.
NOTE: These functions are accessible in the TIME mode, i.e. when the mode indictor is
below TIME.
In the watch time mode, the fields display the following data as shown in Fig. 2.1:
a) Day of the week;
b) Current time;
c) Date dd.mm in 24h display or mm.dd in 12h display, seconds or dual time according
to the last selection (changing data with the [ON OFF] button;
d) Am/pm indicator in 12 h display; and
e) Graphical display of seconds, once every two seconds a new segment lights up until
a full circle of segments (60 seconds) is lit.
2.1 SETTING THE TIME AND CALENDAR
1. In the main mode of the time function, press the [SELECT] button for 2 seconds to
begin the setup process. In the bottom field, seconds will begin to flash.
2. Press the [SELECT] button to move to the field you want to change. The order of
fields is seconds, minutes, hours, 12/24h, year, month, day, dual-time hours, dual-
time minutes. You change the value in the field that is flashing.
3. Press the [ON OFF] button to scroll the value in the field up or the [QUICK] button to
scroll down. In the seconds field, the [QUICK] button resets the seconds to zero.
4. Press the [MODE] button to accept the changes made and exit the setup process.
NOTE: If the 12-hour clock is chosen either AM/PM will appear below the hour in the
middle field and the date shows the month first then the day.
Once you determine the year, month and day, the Observer will supply the day of the
week in the top field.
Setup mode will automatically be released if left idle for more than one minute.
