25
Beware: The sea level pressure and the reference altitude are related to each other.
Adjusting one will automatically adjust the other.
Note: If no buttons are pushed within one minute after entering the setup the
Escape203 automatically exits the setup mode.
5.2.2. To Set the Barometer Alarm
In the [BARO] mode:
1. PRESS and HOLD the Center button in for 2 seconds.
2. PRESS the Center button (once) until the text "AL" will appear in Field 3. Located
in Field 4 text "On" or "Off" will begin to flash.
3. PRESS either the [+] button or the [-] button to choose between on and off.
Note: Accepting the "On" setting notifies you that a pressure drop of 4 hPas / 0.12
inHg or more during a 3-hour period has occurred and the device will activate an
audible alarm and flash an alarm symbol on the LCD display for 20 seconds. Barom-
eter Alarm is on and the alarm symbol visible only when you are using Escape203 as
Weather Station (not Altimeter).
4. At the desired setting, PRESS and HOLD the Center button in for 2 seconds to
accept the changes made and return to the main [BARO] mode.
Note: If no buttons are pushed within one minute after entering the setup, the
Escape203 automatically exits the setup mode.