542544
51
Zoom out
Zoom in
Previous page
1/135
Next page
WARNING
If there are several divers using a Suunto wireless transmitter,
always ensure that each diver is using a different code before
starting the dive.
In case there are several divers using the same code, the transmitter's code must be
changed before diving.
To assign a new transmitter code:
1.
Slowly open the cylinder valve fully to pressurize the system.
2.
Immediately close the tank valve, and quickly depressurize the regulator so that
the pressure is reduced to less than 10 bar/145 psi. Wait about 10 seconds, and
slowly open the cylinder valve again to re-pressurize to above 15 bar/300 psi.
The transmitter assigns a new code automatically.
NOTE
To pair on the new transmitter code, the Suunto D6i code
must be cleared first.
To re-pair the transmitter with the new code and the Suunto D6i dive computer:
1.
In the DIVE mode of the Suunto D6i, long-press the DOWN button to enter the
DIVE settings. Enter the Tank Press Pairing menu (Refer to Section 5.8.3. Setting
the tank pressure pairing). Short-press the SELECT button to bypass the tank
pressure ON/OFF selection (the tank pressure transmission must remain ON).
52
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suunto D6i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suunto D6i in the language / languages: English as an attachment in your email.

The manual is 8,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Suunto D6i

Suunto D6i User Manual - German - 151 pages

Suunto D6i User Manual - Dutch - 142 pages

Suunto D6i User Manual - Spanish - 151 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info