Manual Suse openSUSE 12.2 (page 458 of 530) (English)

488889

458

Zoom out

Zoom in

1/530

Set the Key Input Type either to Passphrase, ASCII or Hexadecimal.

Enter the respective Encryption Key (usually only one key is used):

If you have selected Passphrase, enter a word or a character string from which

a key is generated according to the specied key length (per default, 128-bit)

ASCII requests an input of 5 characters for a 64-bit key and 13 characters for

a 128-bit key.

For Hexadecimal, enter 10 characters for a 64-bit key or 26 characters for a

128-bit key in hexadecimal notation.

To adjust the key length to a lower bit rate (which might be necessary for

older hardware), click WEP Keys and set the Key Length to 64 bit. The WEP

Keys dialog also shows the WEP keys that have been entered so far. Unless

another key is explicitly set as default, YaST always uses the rst key as de-

fault key.

To enter more keys for WEP or to modify one of the keys, select the respective

entry and click Edit. Select the Key Input Type and enter the key.

Conrm your changes with OK.

To enter a key for WPA-PSK:

Select the input method Passphrase or Hexadecimal.

Enter the respective Encryption Key.

In the Passphrase mode, the input must be 8 to 63 characters. In the Hexadec-

imal mode, enter 64 characters.

If you have chosen WPA-EAP authentication, click Next to switch to the WPA-EAP

dialog, where you enter the credentials and certicates you have been given by your

network administrator.

Select the EAP Mode the RADIUS server uses for authentication. The details

you need to enter in the following depend on the selected EAP Mode.

440 Reference

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Suse openSUSE 12.2 in the language / languages: English as an attachment in your email.

The manual is 8,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Suse openSUSE 12.2

Suse openSUSE 12.2 Quick start guide - English - 284 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Suse openSUSE 12.2 Manual

Product: