488889
257
Zoom out
Zoom in
Previous page
1/284
Next page
A.2.2.3 No Bootable DVD Drive Available
If your computer does not contain a bootable DVD-ROM drive or if the one you have
is not supported by Linux, there are several options you can install your machine
without a built-in DVD drive:
Using an External Boot Device
If it is supported by your BIOS and the installation kernel, boot from external DVD
drives or USB storage devices.
Network Boot via PXE
If a machine lacks a DVD drive, but provides a working ethernet connection,
perform a completely network-based installation. See Section “Remote Installation
via VNC—PXE Boot and Wake on LAN” (Chapter 2, Remote Installation, ↑Refer-
ence) and Section “Remote Installation via SSH—PXE Boot and Wake on LAN”
(Chapter 2, Remote Installation, ↑Reference) for details.
External Boot Devices
Linux supports most existing DVD drives. If the system has neither a DVD drive nor
a oppy disk, it is still possible that an external DVD drive, connected through USB,
FireWire, or SCSI, can be used to boot the system. This depends mainly on the inter-
action of the BIOS and the hardware used. Sometimes a BIOS update may help if
you encounter problems.
When installing from a KDE or GNOME Live CD, you can also create a Live USB stick”
to boot from. Refer to http://en.opensuse.org/Live_USB_stick for detailed instruc-
tions.
A.2.2.4 Booting from Installation Media Fails
One reason why a machine does not boot the installation media can be an incorrect
boot sequence setting in BIOS. The BIOS boot sequence must have DVD drive set as
the rst entry for booting. Otherwise the machine would try to boot from another
medium, typically the hard disk. Guidance for changing the BIOS boot sequence can
be found the documentation provided with your motherboard, or in the following
paragraphs.
The BIOS is the software that enables the very basic functions of a computer. Moth-
erboard vendors provide a BIOS specically made for their hardware. Normally, the
BIOS setup can only be accessed at a specic time—when the machine is booting.
During this initialization phase, the machine performs a number of diagnostic hard-
ware tests. One of them is a memory check, indicated by a memory counter. When
the counter appears, look for a line, usually below the counter or somewhere at the
bottom, mentioning the key to press to access the BIOS setup. Usually the key to
press is one of [Del], [F1], or [Esc]. Press this key until the BIOS setup screen appears.
Procedure A.1: Changing the BIOS Boot Sequence
1 Enter the BIOS using the proper key as announced by the boot routines and
wait for the BIOS screen to appear.
Help and Troubleshooting 245
257


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suse openSUSE 12.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suse openSUSE 12.2 in the language / languages: English as an attachment in your email.

The manual is 14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Suse openSUSE 12.2

Suse openSUSE 12.2 User Manual - English - 530 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info