488890
19
Zoom out
Zoom in
Previous page
1/450
Next page
TIP: Booting from DVD on UEFI machines
►amd64 em64t: DVD1 can be used as a boot medium for machines equipped
with UEFI (Unied Extensible Firmware Interface). Refer to your vendor's doc-
umentation for specic information. If booting fails, try to enable CSM (Com-
patibility Support Module) in your rmware.
1.2.1 Installing from a Network Server Using
SLP
If your network setup supports OpenSLP and your network installation source has been
congured to announce itself via SLP (described in Section 2.2, “Setting Up the Server
Holding the Installation Sources” (page 46)), boot the system, press F4 in the boot
screen and select SLP from the menu.
The installation program congures the network connection with DHCP and retrieves
the location of the network installation source from the OpenSLP server. If the automatic
DHCP network conguration fails, you are prompted to enter the appropriate parameters
manually. The installation then proceeds as described below with the exception of the
network conguration step that is needed prior to adding additional repositories. This
step is not needed as the network is already congured and active at this point.
1.2.2 Installing from a Network Source
without SLP
If your network setup does not support OpenSLP for the retrieval of network installation
sources, boot the system and press F4 in the boot screen to select the desired network
protocol (NFS, HTTP, FTP, or SMB/CIFS). Provide the server's address and the path
to the installation media.
The installation program automatically congures the network connection with DHCP.
If this conguration fails, you are prompted to enter the appropriate parameters manu-
ally. The installation retrieves the installation data from the source specied. The instal-
lation then proceeds as described below with the exception of the network conguration
step needed prior to adding additional repositories. This step is not needed as the network
is already congured and active at this point.
Installation with YaST 7
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suse openSUSE 12.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suse openSUSE 12.1 in the language / languages: English as an attachment in your email.

The manual is 5,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Suse openSUSE 12.1

Suse openSUSE 12.1 User Manual - English - 282 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info