488891

Suse openSUSE 11.3 Manual

47
Zoom out
Zoom in
Previous page
1/178
Next page
6 Leave the conguration screen with OK.
2.4.1 Conguring an HP All-In-One Device
An HP All-In-One device can be congured with YaST even if it is connected to the
parallel port or is made available via the network. If you own a USB HP All-In-One
device, start conguring as described in Procedure 2.9, “Conguring a USB or SCSI
Scanner” (page 36). If it is detected properly and the Test succeeds, it is ready to
use.
If your USB device is not properly detected, or your HP All-In-One device is connected
to the parallel port or the network, run the HP Device Manager:
1 Start YaST and select Hardware > Scanner. YaST loads the scanner database.
2 Start the HP Device Manager with Other > Run hp-setup and follow the on-
screen instructions. After having nished the HP Device Manager, the YaST
scanner module automatically restarts the auto detection.
3 Test it by choosing Other > Test.
4 Leave the conguration screen with OK.
2.4.2 Sharing a Scanner over the Network
openSUSE allows the sharing of a scanner over the network. To do so, congure your
scanner as follows:
1 Congure the scanner as described in Section 2.4, “Setting Up a Scanner”
(page 36).
2 Choose Other > Scanning via Network.
3 Enter the hostnames of the clients (separated by a comma) that should be
allowed to use the scanner under Server Settings > Permitted Clients for
saned and leave the conguration dialog with OK.
2.4.3 Scanning over the Network
To use a scanner that is shared over the network, proceed as follows:
1 Start YaST and select Hardware > Scanner.
2 Open the network scanner conguration menu by Other > Scanning via Net-
work.
3 Enter the hostname of the machine the scanner is connected to under Client
Settings > Servers Used for the net Metadriver
Setting Up Hardware Components with YaST 37
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suse openSUSE 11.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suse openSUSE 11.3 in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info