488891
19
Zoom out
Zoom in
Previous page
1/178
Next page
[F2]Language
Select the display language and a corresponding keyboard layout for the installa-
tion. The default language is English (US).
[F3]Video Mode
Select various graphical display modes for the installation. Select Text Mode if
the graphical installation causes problems.
[F4]Source
Normally, the installation is performed from the inserted installation medium.
Here, select other sources, like FTP or NFS servers. If the installation is deployed
on a network with an SLP server, select an installation source available on the
server with this option. Find information about SLP in Chapter 22, SLP Services
in the Network (↑Reference).
[F5]Kernel
If you encounter problems with the regular installation, this menu oers to disable
a few potentially problematic functions. If your hardware does not support ACPI
(advanced conguration and power interface) select No ACPI to install without
ACPI support. No local APIC disables support for APIC (Advanced Programmable
Interrupt Controllers) which may cause problems with some hardware. Safe Set-
tings boots the system with the DMA mode (for CD/DVD-ROM drives) and power
management functions disabled.
If you are not sure, try the following options rst: Installation—ACPI Disabled or
Installation—Safe Settings. Experts can also use the command line (Boot Options)
to enter or change kernel parameters.
[F6]Driver
Press this key to notify the system that you have an optional driver update for
openSUSE. With File or URL, load drivers directly before the installation starts. If
you select Yes, you are prompted to insert the update disk at the appropriate
point in the installation process.
[F7]Arch
If you install from an installation medium supporting 32bit and 64bit architectures
and have a processor with 64-bit support, select whether to install a 64-bit or 32-
bit system. By default, a 64-bit system is installed on a computer with 64-bit
support. To install a 32-bit system, press [F7] then select 32bit.
TIP: Using IPv6 during the Installation
By default you can only assign IPv4 network addresses to your machine. To enable
IPv6 during installation, enter one of the following parameters at the bootprompt:
ipv6=1 (accept IPv4 and IPv6) or ipv6only=1 (accept IPv6 only).
After starting the installation, openSUSE loads and congures a minimal Linux system
to run the installation procedure. To view the boot messages and copyright notices
during this process, press [Esc]. On completion of this process, the YaST installation
program starts and displays the graphical installer.
Installation with YaST 9
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suse openSUSE 11.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suse openSUSE 11.3 in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info