782758

SureFlap Microchip Pet Door Manual

12
Zoom out
Zoom in
Previous page
1/265
Next page
11
7.3 Installation in glass doors or windows
When working with cut glass always wear protective gloves as the edges may be sharp.
The SureFlap Microchip Pet Door is ideal for mounting in single or double-glazed windows.
If you need to have a hole cut in a window, please ask a qualied glazier to do it, as
cutting glass is a skilled job. If you need to get a hole cut in your window a circular hole
with a diameter of 300mm (11 13/16”) is the ideal size. A mounting adaptor (Product Code:
GMA101) is available to complete an installation in glass, and is suitable for covering holes
from 294mm (11 9/16”) to 320mm (12 5/8”) in diameter, see Figure 10.
For details of where to purchase this adaptor see our website www.surepetcare.com.
If you have a double-glazed window you will need to get a replacement unit manufactured
with the hole cut in it. If possible you should request the use of a non-metallic spacer bar.
Once your glass has been cut and installed in the door or window you are ready to complete
the install.
1. A circular hole 300mm in diameter is required to accommodate the tunnel. See Figure 11.
2. We recommend running a bead of ‘All Weather Sealant’ around the edge of the mounting
adaptor for both sides of the glass, see Figure 12. The sealant will help secure the pet
door in place after installation, particularly with larger hole sizes, and also help prevent
moisture getting in from outside. This type of sealant can be purchased from a glazing
company and most DIY stores.
3. Slide one of the mounting adaptor rings over the main assembly.
4. From inside the house slide the tunnel of the main assembly through the hole in the glass.
From outside the assembly should look like that of Figure 13.
5. From outside the house mount the second part of the mounting adaptor and then the
external frame, see Figure 14 and 15.
6. Screw the two halves together as in Figure 16. If mounting in a single pane use the
shortest of the three pairs of screws. A double glazed panel may require the mid-sized
screw, depending on its thickness. Check the assembly is centred with the circular hole
before fully tightening the screws.
7. Align the white screw caps with the slot pointing outwards and then push rmly into place.
8. From inside the house you will now see your pet’s stylish new entrance as in Figure 17.
Figure 10
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SureFlap Microchip Pet Door at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SureFlap Microchip Pet Door in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info