782759
14
Zoom out
Zoom in
Previous page
1/362
Next page
13
Program your pet into the Pet Door
To program your pet’s microchip ID into the Pet Door, you’ll need to get them to put their head
inside the Pet Door tunnel so their chip can be read. If you’re adding multiple pets, avoid mixing
up microchip IDs by adding each one separately (and making a note of the order you added them).
We strongly advise programming all of your pets into the Pet Door before fitting it.
1
Remove the button cover to reveal the six buttons on the front
of the Pet Door. Press the ‘Add a pet’ button once to activate
the ‘Add a pet’ mode.
2
When the Door is in ‘Add a pet’ mode, the catches at the front
of the Pet Door will drop (you will hear a click) and the display
on the LCD screen will start flashing.
3
The Pet Door is now waiting for your pet. Place some dry food
or a treat inside the tunnel as close to the clear plastic door as
possible. The aim is to encourage your pet to put its head inside
the tunnel as if it were coming home.
4When your pet enters the tunnel to eat the food, the sensors
inside the product activate and the Pet Door saves the chip ID.
5
Once the microchip has been successfully added, the screen
display will show the number that has been assigned to the pet,
e.g. 01 for the first pet you add and 02 for the second etc. When
your pet removes its head from the tunnel the catches on the
Door will move up again and the screen will go back to normal.
We advise that you encourage your pet to put its head back into the tunnel once it’s programmed in.
This is to double check that they can open the door reliably. Repeat this process to add more pets.
To perform the programming process with the RFID collar tag simply follow steps 1, 2 and
4 above and hold the collar tag inside the tunnel, making sure you touch the clear plastic
door. Make sure you are not wearing any metal jewellery when programming a collar tag
as this can cause interference.
If you want to use the Pet Door for more than one pet, you can add more pets easily by
repeating the process. You are able to store up to 32 pets in each Pet Door. If your Pet Door
is already installed but you are looking to add an additional pet then press the ‘Add a pet’
button and wait for that pet to go through the door.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SureFlap Microchip Pet Door Connect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SureFlap Microchip Pet Door Connect in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 15.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info