782756

SureFlap Microchip Cat Flap - serie nr 1-1999999 Manual

11
Zoom out
Zoom in
Previous page
1/170
Next page
11
6.2 Installation in glass doors or windows
When working with cut glass always wear protective gloves as the edges may be sharp.
SureFlap is ideal for mounting in single or double-glazed windows. If you need to have a hole cut
in a window, please ask a qualied glazier to do it, as cutting glass is a skilled job. If you need to
get a hole cut in your window a circular hole with a diameter of 212mm (8 3/8”) is the ideal size.
A mounting adaptor is available to complete an installation in glass, and is suitable for covering
holes from 210mm (8 1/4”) to 260mm (10 1/4”) in diameter, see Figure 12.
For details of where to purchase this adaptor see our website www.sureap.com.
If you have a double-glazed window you will need to get a replacement unit manufactured with
the hole cut in it.
Figure 12
Once your glass has been cut and installed in the door or window you are ready to complete the
install.
1. A circular hole 212mm in diameter is required to accommodate the tunnel. See Figure 13.
2. If installing the SureFlap Microchip Cat Flap in a double glazed panel you may choose to
seal between the panels around the circular hole to avoid moisture collecting inside. Do not
use metal in any such seal.
3. We recommend running a bead of ‘All Weather Sealant’ around the edge of the hole on
both sides of the glass, see Figure 14. The sealant will help secure the cat ap in place
after installation, particularly with larger hole sizes, and also help prevent moisture getting
in from outside. This type of sealant can be purchased from a glazing company and most
DIY stores.
4. Slide one of the mounting adaptor rings over the main assembly, see Figure 15.
5. From inside the house slide the tunnel of the main assembly through the hole in the glass.
From outside the assembly should look like that of Figure 16.
6. From outside mount the second part of the mounting adaptor and then the external frame,
see Figure 17. When working with cut glass always wear protective gloves as the edges
may be sharp.
7. Screw the two halves together as in Figure 18. If mounting in a single pane use the shortest
of the three pairs of screws. A double glazed panel may require the mid-sized screw,
depending on its thickness. Check the assembly is centred with the circular hole before fully
tightening the screws.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SureFlap Microchip Cat Flap - serie nr 1-1999999 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SureFlap Microchip Cat Flap - serie nr 1-1999999 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 2.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info